Efficient Abode

Why Laundry at 11 PM Costs Less Than Laundry at 6 PM (and How to Cash In)

14 min read

↓ Jump to Action Guide

Most homeowners think about saving energy as using less of it. But on a time-of-use (TOU) rate plan, when you use electricity matters just as much as how much you use. A typical TOU plan might charge 12 to 15 cents per kWh overnight and 30 to 45 cents per kWh between 4 PM and 9 PM. That means the exact same dryer cycle can cost you $0.90 at 11 PM and $2.40 at 6 PM.

Tools We Recommend

As an Amazon Associate, we earn from qualifying purchases.

The reason is simple supply and demand. Between about 4 and 9 PM, people get home, turn on lights, cook dinner, run air conditioning, and charge devices all at once. Utilities have to fire up their most expensive power plants (often natural gas peakers) or buy power on the spot market to meet that spike. Overnight, demand drops and cheap baseload power is plentiful, so utilities pass those lower costs on to customers who shift their usage.

This post covers how to find out whether your utility offers time-of-use pricing, how to schedule laundry and other flexible loads into the cheapest hours, and how to automate it so you never have to think about it again. Even if you are on a flat rate today, the same strategies will prepare you, since more utilities are moving customers to TOU plans every year.

Savings: 10 to 30% on electricity costs for shifted loads
Difficulty: Easy
Time: 15 to 30 minutes
Payback: Immediate (no-cost option) or 4 to 8 months (smart plug option)
💰10 to 30% on electricity costs for shifted loads
🔧Easy
⏱️15 to 30 minutes
📈Immediate (no-cost option) or 4 to 8 months (smart plug option)
✓ Renter Safe✓ DIY Friendly✓ Immediate Results

What You’ll Need

Click on an item below to shop for the recommended items for this recipe on Amazon.

🔧Washer Manual
🔧Dryer Manual

As an Amazon Associate, we earn from qualifying purchases.

How to Do It



Time: 15 minutes
Cost: $0
Difficulty: Easy
Check your utility’s website or latest bill first to confirm you are actually on a TOU plan. If you are on a flat rate, shifting will not change your cost, but it is still worth knowing before you switch plans.
  1. Log into your utility account or check your latest bill to find your rate plan. Look for the words ‘time-of-use,’ ‘TOU,’ or ‘peak/off-peak’ and write down the peak and off-peak hours.
  2. Find the delay-start or ‘delay wash’ button on your washer and dryer. Check the manual if it is not obvious. Most let you delay by 1 to 24 hours.
  3. Load the washer after dinner and set it to start after your off-peak window begins (often 9 PM, 10 PM, or midnight). Move the wet clothes to the dryer before bed, or run the washer first and the dryer second.
  4. If you prefer to dry in the morning, set the dryer to delay-start so it finishes before your peak window opens, and avoid running it between 4 and 9 PM.
  5. For two weeks, track which loads you shifted. Compare your next bill’s per-kWh charges to the prior month to confirm the savings.
Time: 1 to 2 hours
Cost: $25 to $120
Difficulty: Medium
Never plug an electric dryer into a standard smart plug. Dryers draw 20 to 30 amps at 240 volts, far beyond what consumer smart plugs can handle. Use a smart plug only for gas dryer controls or low-wattage devices, or install a dedicated 240V smart relay with an electrician.
  1. Compare your current rate plan to your utility’s TOU and EV/whole-house plans using the utility’s online rate comparison tool. Estimate your savings using your last 12 months of usage data, which most utilities provide as a downloadable file.
  2. If a TOU plan looks favorable, call or enroll online. Ask about any switching fees, minimum enrollment periods, and whether you can switch back.
  3. Install a smart plug rated for 15 amps on your washer (a standard 120V washer is fine) so you can schedule it from an app. Set a schedule matching your off-peak window.
  4. For gas dryers, plug the dryer’s 120V cord into the same type of smart plug. For electric dryers, stick with the built-in delay-start or consult an electrician about a 240V smart control.
  5. Use your utility’s app or a smart meter portal to view hourly usage. Confirm your laundry loads are landing in the off-peak window and adjust schedules as needed.
  6. Review your bill after one full billing cycle. Compare it with the same month last year (adjusting for weather) to measure your real savings.
Time: 1 day (delivery and install)
Cost: $900 to $1,800
Difficulty: Medium
This option makes sense if your dryer is 10+ years old or already on its last legs. Replacing a working dryer purely for TOU savings rarely pays back quickly.
  1. Look for an ENERGY STAR certified heat pump dryer. These use 40 to 50% less energy than a conventional electric dryer, which cuts the cost of every cycle whether you run it on-peak or off-peak.
  2. Choose a model with Wi-Fi connectivity and built-in scheduling. Many let you set automatic off-peak runs or respond to utility signals.
  3. Check your utility and state rebate programs. Many offer $100 to $600 for ENERGY STAR heat pump dryers, and the federal 25C and 25D programs may apply depending on your situation.
  4. Plan for ventilation. Heat pump dryers are ventless, which simplifies installation, but they need space for airflow and a place for condensate to drain or be emptied.
  5. Pair the new dryer with an ENERGY STAR washer that has a high spin speed. Faster spin removes more water, shortening dryer time and saving 10 to 20% on drying energy.

Why It Works: The Benefits

1

Lower Electricity Bills

A household running 8 loads of laundry per week can save roughly $150 to $300 per year by moving the dryer off-peak on a typical TOU plan, depending on the rate spread.

2

No Change in Appliance Performance

Your clothes get just as clean and dry regardless of what time the cycle runs. You are only changing the schedule, not the result.

3

Reduced Strain on the Grid

Shifting load away from the 4 to 9 PM peak lowers demand on the grid’s dirtiest and most expensive generators, which can mean lower carbon emissions per kWh used.

4

Stackable With Other Savings

The same off-peak habit applies to dishwashers, EV charging, and pool pumps. Together, shifting these flexible loads can cut the electricity portion of a bill by 15 to 30%.

5

Less Heat During Summer Evenings

Running the dryer at night instead of 6 PM keeps heat and humidity out of the house during the hours your air conditioner is already working hardest.

💰 Savings Impact by Action

Dryer Shifting25%

Moving the dryer from the 4 to 9 PM peak to off-peak can cut that load’s cost by 25 to 60% depending on your rate spread.

Cold Water Wash90%

Roughly 90% of a washer’s energy goes to heating water, so cold cycles nearly eliminate the heating cost.

High-Spin Cycle15%

A faster spin extracts more water and can reduce dryer run time by 10 to 20%.

Heat Pump Dryer45%

ENERGY STAR heat pump dryers use roughly 40 to 50% less energy than conventional electric models.

Whole-Home Shifting20%

Combining laundry, dishwasher, and EV charging shifts can lower the electricity portion of a bill by 15 to 30%.

🏠 Key Concepts Explained

Time-of-Use Rate StructureUtility BillingTOU plans divide the day into peak, mid-peak, and off-peak windows with different per-kWh prices. Off-peak rates are often 50 to 70% lower than peak rates, so the clock matters as much as the meter.
Peak Demand WindowGrid DemandThe grid is most strained from roughly 4 to 9 PM on weekdays when homes are active and air conditioners are running. Utilities pay a premium to meet this demand, and they pass that cost along through higher peak rates.
Appliance WattageEnergy UseAn electric dryer pulls 3,000 to 5,000 watts, making it the biggest laundry-day energy hog. A washer uses only 300 to 500 watts. Shifting the dryer gets you most of the savings, so prioritize it.
Water Heating LoadHidden CostAbout 90% of a washing machine’s energy goes to heating water. If you have an electric water heater, hot-water cycles at peak hours cost far more than the same cycle off-peak, and washing in cold water avoids the issue entirely.
Flexible vs. Fixed LoadsBehavioralLights, cooking, and HVAC are hard to shift. Laundry, dishwashing, EV charging, and pool pumps are flexible loads you can run any time. Moving flexible loads off-peak is the easiest way to cut costs without sacrificing comfort.
Delay-Start TechnologyAutomationMost washers and dryers built since about 2012 include a delay-start feature (usually up to 12 or 24 hours). This lets you load the machine in the evening and have it start itself at the cheapest time.

⚠️ Watch Out: Do not use a standard consumer smart plug with an electric dryer, an electric oven, or any 240V appliance. These devices draw far more current than a plug rated for 15 amps can handle, which creates a real fire risk. Also avoid leaving wet clothes sitting in the washer for more than 8 to 12 hours, since mildew can develop and leave a musty smell. If your delay-start window is long, use a hot-wash or sanitize cycle occasionally, or add a bit of white vinegar to the drum. Finally, if you are on a TOU plan, remember that weekends and holidays are often entirely off-peak, so check whether weekend laundry makes more sense for the biggest loads.
Pro tip: Run the dryer first thing in the morning before your peak window starts rather than right after you get home from work. Many TOU plans have a low-cost ‘super off-peak’ window from midnight to 6 AM, and some plans offer a shoulder period before peak. A dryer set to finish at 6 AM keeps clothes from wrinkling, costs the least, and lets you fold fresh laundry with your coffee.

The Science Behind It

Electricity cannot be stored cheaply at large scale, so the grid has to match supply to demand second by second. Utilities rely on a mix of power sources ranked by cost. Cheap, steady sources like nuclear, hydro, and wind run whenever they can. As demand climbs, the grid calls on progressively more expensive generators, ending with natural gas ‘peaker’ plants that may only run a few hundred hours a year but cost much more per kWh to operate. TOU rates are designed to pass this cost curve to customers so they have a reason to shift flexible use out of the peak.

Laundry is a perfect candidate because it combines high power draw with total timing flexibility. A typical electric dryer uses roughly 3 to 5 kWh per load, so a 25 cent per kWh price gap between peak and off-peak translates to $0.75 to $1.25 saved on each load. A washer is smaller, around 0.2 to 0.5 kWh per load, but if it heats water with electricity the savings go up. A household doing 6 to 8 loads per week shifts several hundred kWh per year out of the peak.

There is also a thermodynamic bonus. Dryers pump heat and moisture into your living space, and ventless or poorly vented units add even more. Running a dryer at 6 PM on a hot summer evening forces your air conditioner to remove that extra heat at the same moment it is already working its hardest and at its highest price. Moving the load to overnight avoids that double penalty.

Frequently Asked Questions

▼ How do I know if I am even on a time-of-use plan?

Check your latest utility bill or log into your online account and look for the rate schedule name. If you see terms like TOU, peak, off-peak, or shoulder, you are on one. If your bill shows a single price per kWh, you are on a flat rate, and you can call your utility to ask whether a TOU option is available.

▼ My delay-start works, but my clothes smell musty in the morning. What is wrong?

Wet laundry sitting in the washer for many hours can grow mildew. Use the delay-start on the washer only for short gaps, and run the washer in the evening so the load finishes before bed. Leave the washer door cracked open afterward and add a cup of white vinegar to a monthly hot cleaning cycle.

▼ Can renters do this without landlord permission?

Yes. Delay-start is a built-in appliance feature, and shifting your habits requires no installation. If you are in a building with a shared laundry room, you can still do your laundry during off-peak hours, though the savings only apply if you pay for your own electricity. Plug-in smart plugs for your own washer are also fully renter-safe.

▼ How long before I actually notice savings on my bill?

You will see the difference on your first full billing cycle after switching your habits, usually within 30 days. The savings from laundry alone are modest, often $10 to $25 per month, but they stack up fast when you also shift the dishwasher and EV charging.

▼ What if I have a gas dryer? Does this still help?

A gas dryer uses natural gas for heat, so TOU electricity rates do not affect most of its cost. The washer and the dryer’s motor and controls still use electricity, so shifting them off-peak helps a little, but the savings are much smaller than with an electric dryer. Focus on other flexible electric loads instead.

Quick Tips

  • Check whether your utility offers a free hourly usage portal. Seeing your actual load shape makes it obvious how much of your use falls in the peak window.
  • Use the dryer’s moisture sensor setting instead of a timer. Over-drying wastes energy and shortens fabric life, and you will pay for every extra minute.
  • Wash in cold water whenever possible. About 90% of a washer’s energy goes to heating water, and modern detergents work well in cold.
  • Clean the dryer’s lint filter every load and the vent duct every year. A clogged vent can raise drying time by 30% or more and is a leading cause of dryer fires.

Variations for Your Situation

  • Apartment/Rental: Use the delay-start built into your own washer and dryer if you have in-unit laundry, which costs nothing and needs no permission. If you use a shared laundry room, check whether your electricity is submetered. If it is not, you will not see TOU savings, but you can still save by using cold water and high-spin cycles.
  • Tight Budget (under $50): Skip any new hardware. Learn your utility’s off-peak hours, use the delay-start button on your existing machines, and run laundry after 9 PM or on weekends. A 15-amp smart plug for the washer ($15 to $25) is the only optional spend and is not required.
  • Older Home (pre-1980): Older homes often have undersized electrical panels and older dryer circuits, so avoid adding new high-draw devices without an electrician’s review. Check the dryer vent for lint buildup and flexible foil ducts, which restrict airflow and waste energy. If your washer and dryer are 15+ years old, a modern ENERGY STAR pair can cut laundry energy by 25 to 40%, making a replacement worth considering.
  • Solar Homes: If you have rooftop solar, the best time to run laundry may actually be midday when your panels produce the most. Check whether you are on net metering or a TOU plan with a solar export credit, and shift loads to your highest-production hours instead of overnight.

Tools We Recommend

As an Amazon Associate, we earn from qualifying purchases.