Efficient Abode

The Time-of-Use Rate Plan You May Already Be On (And How to Stop Overpaying for It)

13 min read

↓ Jump to Action Guide

Check your last electric bill. Somewhere in the fine print you might see words like “On-Peak,” “Off-Peak,” “Super Off-Peak,” or “TOU.” If you do, you are on a time-of-use (TOU) rate plan, and the price you pay per kilowatt-hour depends on what time of day you use it. Many utilities in California, Arizona, Texas, the Midwest, and increasingly the Northeast have made TOU the default for new customers or moved existing customers over with only a short notice letter.

Tools We Recommend

As an Amazon Associate, we earn from qualifying purchases.

Here is why it matters. On a typical TOU plan, electricity might cost 15 to 20 cents per kWh overnight and 40 to 60 cents per kWh between 4 p.m. and 9 p.m., right when most families cook dinner, run the AC, do laundry, and turn on the lights. If your habits have not changed since you were on a flat rate, you may be paying more than you did before, and you would never know it just from looking at the total.

This post walks through how to confirm which plan you are on, how to find your peak window, and how to shift your usage for real savings. We cover a zero-cost quick fix you can do tonight, a DIY upgrade using smart controls and timers, and a few situations (renters, tight budgets, older homes) where the strategy changes.

Savings: 10 to 30% on your electric bill
Difficulty: Easy
Time: 30 minutes to confirm your plan, then ongoing habit shifts
Payback: Immediate for behavior changes; 3 to 12 months for smart devices
💰10 to 30% on your electric bill
🔧Easy
⏱️30 minutes to confirm your plan, then ongoing habit shifts
📈Immediate for behavior changes; 3 to 12 months for smart devices
✓ Renter Safe✓ DIY Friendly✓ Immediate Results

What You’ll Need

Click on an item below to shop for the recommended items for this recipe on Amazon.

🔧Appliance Timer
🔧Utility Rate Table

As an Amazon Associate, we earn from qualifying purchases.

How to Do It



Time: 30 minutes, then ongoing
Cost: $0
Difficulty: Easy
This approach alone captures roughly half of the available savings for most households.
  1. Log into your utility account or check a recent paper bill and find your rate plan name. Look for terms like TOU, Time of Use, Time-Variable, or Rate Schedule names such as TOU-D or E-TOU-C.
  2. Find the published rate table on your utility’s website and write down the peak, off-peak, and super off-peak hours and prices for both summer and winter. Put them on a sticky note on the fridge.
  3. Stop running the dishwasher, washer, and dryer during peak hours. Use the delay start feature on your dishwasher and washer to run at 9 or 10 p.m. or early morning.
  4. Cook with the microwave, slow cooker, or outdoor grill during peak hours when possible. Ovens and electric ranges are among the largest instant loads in the home.
  5. Raise your AC setpoint by 3 to 4 degrees during the peak window only. Each degree of setback saves roughly 3% on cooling energy during that period.
Time: 2 to 4 hours
Cost: $50 to $300
Difficulty: Medium
Most utilities offer rebates on smart thermostats ($25 to $100), and some run free load-shifting programs.
  1. Install or reprogram a smart or programmable thermostat to pre-cool the home 2 to 3 degrees below your normal setpoint starting 2 to 3 hours before peak begins, then let it drift up to 78 to 80 degrees during peak.
  2. Plug your window AC, space heater, dehumidifier, or pool pump into a smart plug with scheduling ($10 to $20 each) and set it to avoid peak hours.
  3. If you have an electric water heater, add a timer or enable its built-in schedule so it heats in off-peak hours only. A well-insulated tank loses just 2 to 4 degrees over several hours.
  4. Set your EV charger or the vehicle’s own app to begin charging after the off-peak window opens, usually 9 p.m. to midnight. A 40 kWh charge can cost $6 off-peak versus $18 or more on-peak.
  5. Review your utility’s online usage portal or app weekly for the first month. Look for hourly graphs and identify any peak-hour spikes you missed, then adjust schedules.
  6. Ask your utility whether it offers a free smart meter app, a bill alert system, or a TOU rate comparison tool to confirm you are on the best plan for your usage pattern.
Time: 1 to 2 days of installation
Cost: $1,500 to $15,000 before incentives
Difficulty: Hard
Best for homes with high evening usage, solar panels, or a large TOU rate spread. Federal tax credits may cover up to 30% of qualifying installs.
  1. Request a usage analysis from a licensed electrician or energy auditor. Ask for hourly load data and an estimate of how much of your bill falls in the peak window.
  2. Get at least three quotes for a home battery system or a heat pump water heater, and ask each installer to model payback using your actual TOU rate table.
  3. If you have solar, program the battery to charge from panels midday and discharge during the peak window, avoiding grid purchases at the highest rate.
  4. Check for utility, state, and federal incentives before signing. Many utilities add rebates or special battery rates that significantly shorten payback.

Why It Works: The Benefits

1

Lower Monthly Bills

Households that actively shift usage typically save 10 to 30% compared to staying on the same plan without changing habits. A $200 monthly bill can drop to $140 to $180.

2

No Equipment Required to Start

Running the dishwasher after 9 p.m. instead of right after dinner costs nothing and can save 20 to 40 cents per load on typical plans.

3

Reduced Grid Strain

Shifting load away from the peak window lowers the need for fossil-fuel peaker plants, which tend to be the dirtiest and most expensive generators on the grid.

4

Better Value From Big Purchases

If you own an EV, heat pump water heater, or home battery, TOU rates can cut the cost of running them by 40 to 60% compared to charging or heating at peak.

5

Bill Predictability

Once your schedule is dialed in, monthly bills become more stable because your biggest loads always run at the cheapest rate.

💰 Savings Impact by Action

Appliance Shifting12%

Moving dishwasher, laundry, and dryer loads to off-peak hours typically trims 8 to 12% from a TOU electric bill.

Thermostat Pre-Cooling15%

Pre-cooling before peak and setting back during the window can cut summer cooling costs by 10 to 20% on steep TOU plans.

EV Charging55%

Charging an EV off-peak instead of on-peak can cut per-mile fuel costs by 40 to 60% depending on your rate spread.

Water Heater Timer20%

Heating water only during off-peak hours can reduce water heating costs by 15 to 30% with minimal comfort impact.

Right Rate Plan10%

Switching to the best-fit rate plan for your usage pattern can save an additional 5 to 15% with no behavior change.

🏠 Key Concepts Explained

Peak Demand WindowUtility BillingUtilities charge more when the grid is stressed, typically 4 to 9 p.m. on weekdays. Knowing your exact window is the single most valuable piece of information on your plan.
Rate SpreadUtility BillingThe gap between your cheapest and most expensive hour determines your savings potential. A 3:1 spread (for example 15 cents versus 45 cents) rewards load shifting far more than a 1.5:1 spread.
Seasonal Rate TiersUtility BillingMany TOU plans have different peak hours and prices in summer versus winter. A schedule that saved money in March may cost you in July if the window moved or the rate jumped.
Thermal Mass and Pre-CoolingBuilding ScienceYour home’s walls, floors, and furnishings store coolness. Running the AC harder in the morning when rates are low lets the house coast through the expensive afternoon window with little or no AC runtime.
Deferrable LoadsBehavioralDishwashers, washers, dryers, and EV chargers do not care when they run. Moving these to off-peak hours costs nothing in comfort and often saves 3 to 6 dollars per week on a heavy-use plan.
Demand ChargesUtility BillingSome TOU plans also bill based on your highest 15-minute spike of usage. Running the dryer, oven, and AC at the same moment can set an expensive peak for the whole month.

⚠️ Watch Out: Do not assume a TOU plan is automatically better or worse for you. If your household is home and using power heavily from 4 to 9 p.m. and cannot shift loads, a flat rate or a different TOU variant with a shorter peak window may cost less. Most utilities allow you to switch plans, usually once per year, so compare before committing. Never put a heater, AC, or medical device on a timer that could cut power unexpectedly, and do not use consumer smart plugs on loads above their amperage rating (usually 15 amps). If you want to wire a timer into a water heater circuit, hire a licensed electrician.
Pro tip: Call your utility and ask for a rate comparison based on your last 12 months of hourly usage. Many utilities will run this for free, and it can reveal that a different TOU plan, or even a flat-rate plan, would save you $100 to $400 a year with zero behavior change.

The Science Behind It

Electricity cannot be stored cheaply at grid scale, so utilities must generate it at the moment it is used. During the late afternoon and early evening, solar output drops off just as households come home and turn on lights, cooking appliances, and air conditioning. To meet that spike, utilities fire up expensive peaker plants that sit idle most of the year. TOU rates pass that cost directly to the people creating the spike, with the goal of nudging demand toward cheaper hours.

Your home is a surprisingly good battery for thermal energy. Air, drywall, flooring, and furniture all store heat or coolness. When you pre-cool a house from 78 to 74 degrees during the cheap morning hours, you are storing cooling in the building mass. During the afternoon peak, the house warms slowly, often taking 3 to 5 hours to climb back to 78 degrees in a reasonably insulated home. The better your insulation and air sealing, the longer this coasting window lasts, which is why efficiency upgrades and TOU savings compound each other.

Water heating works the same way. A standard 50-gallon tank is basically a thermal battery holding about 7 kWh of stored heat. Heating it overnight at off-peak rates and letting it coast through the evening can cut water heating costs by 30 to 50% on steep TOU plans.

Frequently Asked Questions

▼ How do I know if I am on a time-of-use rate plan?

Log into your utility account and look for a rate schedule name on your bill, often labeled TOU, Time of Use, or something like E-TOU-C or TOU-D. If your bill lists usage in separate On-Peak and Off-Peak lines, you are on TOU. If you cannot tell, call customer service and ask which rate schedule your account is assigned to.

▼ My bill went up after I was switched to TOU. Can I switch back?

In most states you can request a flat or tiered rate, though some utilities limit changes to once every 12 months and a few require TOU for new solar or EV customers. Call your utility, ask for a bill comparison using your actual hourly usage, and request the plan with the lowest projected cost. Do this before making any big habit changes so you know your starting point.

▼ Can renters take advantage of TOU rates without landlord permission?

Yes. Most of the biggest savings come from behavior changes like delaying laundry and dishwashing, and from plug-in devices like smart plugs and portable batteries. You can also use a smart thermostat on window units or install a renter-safe plug-in model without modifying wiring.

▼ How long before I see savings on my bill?

You will see the effect on your very next billing cycle, since TOU charges are calculated hourly. Expect the first full month to show 5 to 15% savings from basic habit shifts, and up to 20 to 30% once smart automation is dialed in. Check your utility’s online hourly usage graph to confirm the changes are working.

▼ What if my home is older than 30 years?

Older homes lose pre-cooled air faster, so the coasting window may be only 1 to 2 hours instead of 3 to 5. Prioritize air sealing and attic insulation first, then layer on TOU strategies. Focus on shifting appliance loads and water heating, which work regardless of how leaky your building envelope is.

Quick Tips

  • Check whether weekends and holidays have different TOU rules. Many plans treat them as entirely off-peak, making Saturday the best day for laundry and big cooking projects.
  • Run the dishwasher with the heated dry cycle off and open the door to air dry. It saves energy at any hour and reduces the load if you accidentally run it near peak.
  • Pre-cool or pre-heat your home in the 2 to 3 hours before peak starts. Even a 2 degree shift is enough for most homes to coast through the window.
  • Re-check your plan every spring and fall. Seasonal rate changes, new utility programs, and your own usage patterns can all shift which plan is cheapest.

Variations for Your Situation

  • Apartment/Rental: Focus on plug-in solutions that need no permanent changes. Use smart plugs ($10 to $20) for window AC units, dehumidifiers, and space heaters, and set delay-start on the dishwasher and washer. Cook with a microwave, air fryer, or slow cooker during peak hours instead of the oven. Most renters can save 8 to 15% this way without touching the wiring.
  • Tight Budget (under $50): Skip the gadgets. Print your utility’s rate table, tape it to the fridge, and shift the dishwasher, washer, and dryer to off-peak hours using built-in delay timers. Raise the AC setpoint 3 degrees during peak and close blinds on west-facing windows by 2 p.m. These zero-cost steps typically deliver 8 to 12% savings.
  • Older Home (pre-1980): Air leakage and thin attic insulation mean pre-cooling does not last as long. Start with $30 to $60 of weatherstripping, outlet gaskets, and attic hatch sealing before relying on thermostat strategies. Then focus on shifting water heating and appliance loads, which are independent of the building envelope. Expect 10 to 18% savings.

Tools We Recommend

As an Amazon Associate, we earn from qualifying purchases.