Your utility probably offered you a time-of-use (TOU) plan by now, with promises of cheaper electricity if you shift your usage. The catch is that the same plan that saves one household $40 a month can cost another household $30 more. Rates on a TOU plan might run 9 cents per kWh overnight and 38 cents per kWh from 4 to 9 p.m., and if most of your power use lands in that expensive window, you lose.
The good news is that you do not have to guess. Your utility already tracks how much electricity you use and when you use it, and that data is usually free to download. With a basic spreadsheet or even a pencil and paper, you can compare what you would have paid on a TOU plan against what you actually paid on your current flat rate.
This post walks through two ways to run that comparison: a quick 15-minute estimate using your monthly bills, and a more precise method using hourly smart meter data. We will also cover how to calculate the payback on changes like a smart thermostat or battery that make a TOU plan more profitable.
What You’ll Need
Click on an item below to shop for the recommended items for this recipe on Amazon.
As an Amazon Associate, we earn from qualifying purchases.
How to Do It
- Pull your last 12 monthly bills and write down your total kWh and total dollars for each month. Divide dollars by kWh to get your current average rate (often 14 to 20 cents).
- Get the TOU rate sheet from your utility’s website. Note the peak, off-peak, and any mid-peak prices, plus the exact hours and which months they apply.
- Estimate what share of your use falls in each window. A rough starting point for a typical home: 25 to 35% peak, 15 to 25% mid-peak, and 40 to 55% off-peak.
- Multiply your monthly kWh by each share, then by each rate, and add the three results. Compare that total to your current bill for the same month.
- Add up the monthly difference across all 12 months, including any change in fixed fees. If the TOU total is lower by at least 8 to 10%, the plan is worth a closer look.
- Log in to your utility account and download your hourly usage data for the past 12 months. Look for an option labeled Green Button, Download My Data, or Interval Data (CSV format works best).
- Open the file in Excel or Google Sheets. Add a column that labels each hour as peak, mid-peak, or off-peak, based on the TOU schedule and the season. A simple IF formula or a lookup table handles this.
- Add a second column that multiplies each hour’s kWh by the matching TOU rate. Then add a third column that multiplies the same kWh by your current flat rate.
- Sum both columns by month and compare. Also sum the fixed monthly charges for each plan. The plan with the lower total wins.
- Run a what-if scenario: move 20 to 30% of your peak kWh to off-peak (laundry, dishwasher, EV charging) and see how the TOU total changes. If the shifted result beats your flat rate by 10% or more, switching makes sense.
- Calculate payback on any shifting equipment. Divide the cost of a smart plug, timer, or thermostat by your projected monthly savings. A $130 smart thermostat saving $12 a month pays back in about 11 months.
Why It Works: The Benefits
A 30-minute calculation prevents a 12-month commitment to a plan that costs you $200 or more extra per year.
Homes with EVs, electric water heaters, or flexible schedules often save 15 to 25% by moving load to off-peak hours.
Once you see which hours cost you most, you can aim upgrades like a smart thermostat or timer at the specific loads that matter.
Shifting use out of the 4 to 9 p.m. window helps utilities avoid firing up expensive peaker plants, which is why they offer the discount in the first place.
💰 Savings Impact by Action
Moving laundry, dishwasher, and EV charging to off-peak hours can cut a typical bill by 10 to 20%.
Lowering the thermostat before peak and raising it during peak reduces afternoon AC use by up to 10% of monthly cost.
Heating water off-peak instead of during evening hours trims water heating costs by 8 to 15%.
Choosing the right plan for your usage pattern, rather than the default, can save 5 to 15% annually.
🏠 Key Concepts Explained
The Science Behind It
Electricity is hard to store, so the grid has to match supply and demand every second. In the late afternoon and early evening, air conditioners, cooking, lighting, and electronics all run at once while solar output fades. Utilities respond by firing up less efficient peaker plants, which cost far more per kWh to run. TOU rates pass that cost signal to you.
Your home can act like a battery if you plan for it. Drywall, framing, furniture, and air all hold heat, and a typical insulated home can be pre-cooled by 2 to 3 degrees before the peak window begins. Because heat moves at a rate proportional to the temperature difference (Newton’s law of cooling), a home that starts at 73 degrees instead of 76 degrees takes longer to warm up to a tolerable limit. Better insulation and air sealing extend that coasting time from one hour to three or more.
Water heaters work the same way. A 50 gallon tank holds roughly 5 to 6 kWh of thermal energy, and heating it overnight at off-peak rates can cut water heating costs by 30 to 50% compared with a plan that charges peak rates for evening reheats.
Frequently Asked Questions
▼ Why did my bill go up after I switched to a TOU plan?
Most likely, too much of your usage is landing in the peak window, which often runs 4 to 9 p.m. Download your hourly data and check how much of your total kWh falls in those hours. If it is over 40%, either shift loads off-peak or ask your utility about switching back, since many allow it within a trial period.
▼ Can renters do this without landlord permission?
Yes. Switching rate plans is done through your utility account and requires no changes to the property. Smart plugs, appliance timers, and portable window or plug-in devices are all renter friendly, and you can shift laundry and dishwasher use by hand.
▼ How long before I actually notice savings on my bill?
You will see the rate change on your very next bill, but a reliable picture takes 2 to 3 billing cycles. Because seasonal rates can differ, give it a full year before you decide whether to stay.
▼ What if I work from home and use power all day?
Work-from-home households often have higher mid-day use, which may fall in a mid-peak or even a cheap solar-hour window on some plans. Run the hourly calculation, because a plan with a cheap midday rate can actually favor you. Avoid plans where peak starts at noon.
▼ Do I need a smart meter to use a TOU plan?
Yes, your utility needs an interval meter that records usage by the hour. Most utilities have installed these already, but if yours has not, they typically install one at no charge when you enroll.
Quick Tips
- Set dishwashers, washers, and dryers on delay start so they run after 9 p.m. or whatever your off-peak window begins.
- Pre-cool your home 2 to 3 degrees lower just before the peak window, then raise the setpoint by 3 to 4 degrees during peak hours.
- Schedule EV charging for the cheapest overnight hours using the car’s app or the charger’s built-in timer. Most EVs add 25 to 40 miles per hour on a Level 2 charger.
- Revisit your calculation once a year, because rates, schedules, and your own usage change.
Variations for Your Situation
- Apartment/Rental: Focus on behavior shifts and plug-in tools. A $15 to $25 smart plug or mechanical timer can delay a window AC, dehumidifier, or space heater, and delay start on your dishwasher and washer costs nothing. Ask whether your unit is individually metered before comparing plans.
- Tight Budget (under $50): Use only free actions: run the dishwasher and laundry after the peak window, cook with a microwave or slow cooker during peak hours, and unplug idle electronics. A $10 outlet timer is the only purchase you may need, and it can pay back in 1 to 2 months.
- Older Home (pre-1980): Older homes often have less insulation and more air leakage, so pre-cooling holds for a shorter time. Before relying on TOU savings, seal obvious leaks and add attic insulation toward R-38, which can double your coasting time during the peak window. Also test the plan using your highest-use summer month since AC loads are typically larger.






